王伟，青年副研究员

硕士研究生导师

招生专业：光学工程

邮箱：wei_w@fudan.edu.cn

研究方向：

光学抛光技术

超精密光学测量

单点金刚石切削

个人简历：

毕业于复旦大学光学工程专业，获工学博士学位。期间参加国家重大科技专项项目“IC装备超精密光学零部件制造技术研发与平台建设”，主要负责“基于机器人系统复杂结构光学零件加工”课题研究。分别于2009年及2013年赴英国伦敦大学学院（UCL）进行学术交流，在David Walker教授指导下进行E-ELT望远镜镜片抛光的相关研究。2015年-2018年于中国科学院上海光学精密机械研究所从事博士后研究工作，合作导师为林尊琪院士，研究方向为大口径KDP晶体的超精密制造。2021年加入复旦大学光电研究院。

代表性成果：

[1]      Qi Lu, Weichao Gong, Ying Sun, Weiwei Wang, Xu Zhang, Peili Wang, Yifan Ding, Wei Wang*, Shijie Liu, Xiangchao Zhang, Min Xu, and Jianda Shao.Fast, intelligent and high-precision adaptive null interferometry for optical freeform surfaces by backpropagation[J]. Optical Express, 2024. Vol.32, No.2 2658-2669.

[2]    Ting Chen, Yunuo Chen, Wei Lang, Xiangchao Zhang, Wei Wang*, Min Xu. In-situ sub-aperture stitching measurement based on monoscopic phase measuring deflectometry[J]. Precision Engineering, 2024, 85: 197-204. 

[3]    Chen Ting, Wei Wang*, Xiangchao Zhang, Min Xu. Subaperture stitching measurement of large flat mirror in single point diamond turning.[C]//8th Asia Pacific Conference on Optics Manufacture & 3rd International Forum of Young Scientists on Advanced Optical Manufacturing, 2023, Proc. of SPIE Vol. 12976: 129760A1-A5 

[4]    Xinyang Ma , Rui Xiong , WeiWang*, and Xiangchao Zhang*. Flexible Measurement of High-Slope Micro-Nano Structures with Tilted Wave Digital Holographic Microscopy[J]. Sensors, 2023, 23(23), 9526. 

[5]    T Chen, Y Chen, X Zhang, W Wang*, M Xu. Workpiece positioning and error decoupling in the single-point diamond turning of freeform mirrors based on the monoscopic deflectometry. Precision Engineering 2022;77: 16–23. 

[6]    Qi Lu, Yifan Ding, Wei Wang*, Shijie Liu, and Min Xu. VIS-NIR superachromatic triplet design with five-color correction for a broadband interferometer[J]. Applied. Optics, 2022, Vol61, No.30, 8880-8888. 

[7]     Zhou G, Wang W*, Xu M. Research on surface profile measurement of weak-rigid plate[C]//10th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing and Metrology Technologies. SPIE, 2021, 12071: 257-265. 

[8]    Ye Lu, Wang Wei*, Zhang Xiangchao, Xu Min, Zhang Jinping, Zheng Liehua. Testing of large-aperture aspheric mirrors using a single coated lens[J]. APPLIED OPTICS,2020,59(15):4577-4582. 

[9]    Ye Junqiang, Niu Zhenqi, Zhang Xiangchao Wang Wei*, Xu, Min. In-situ deflectometic measurement of transparent optics in precision robotic polishing[J]. Precision Engineering,2020,64:63-69. 

[10]   S Wan, X Zhang*, W Wang and M Xu. Effect of pad wear on tool influence function in robotic polishing of large mirrors. The International Journal of Advanced Manufacturing Technology 2019;102(5-8):2521-253. 

[11]   Y Cheng, X Zhang*, H Yuan, W Wang and M Xu. Precision enhancement of three-dimentional displacement tracing for nona-fabrication based on low coherence interferometry. Optics Express 2019; 27(20):28324-28336 

[12]   X Xu, X Zhang*, Z Niu, W Wang and M Xu. Extra-detection-free monoscopic deflectometry for the in situ measurement of freeform specular surfaces. Optics Letter 2019;44(17):4271-4274. 

[13]   Z Niu, X Xu, X Zhang*, W Wang, Y Zhu, J Ye, M Xu and X Jiang. Efficient phase retrieval of two-directional phase-shifting fringe patterns using geometrical constraints of deflectometry. Optics Express 2019; 27(6):8195-8207. 

[14]   S Wan, X Zhang*, H Zhang, M Xu, W Wang and X Jiang. Edge control in precision robotic polishing based on space-variant deconvolution. Precision Engineering 2019;55:110-118. 

[15]   X Xu, X Zhang*, Z Niu, W Wang, Y Zhu and M Xu. Self-calibration of in-situ monoscopic deflectometric measurement in precision optical manufacturing. Optics Express 2019; 27(4):7523-7536. 

[16]   Zhou Guanyu, Wang Wei, Kong Lingbao, Xu min. Design and finite element analysis of a vacuum chuck for weak rigid body parts. Eleventh International Conference on Information Optics and Photonics, CIOP 2019. Proc SPIE Int Soc Opt Eng, 2019,Vol. 11209, 112091A. 

[17]   S Wan, X Zhang*, M Xu, W Wang and X Jiang. Region-adaptive path planning for precision optical polishing with industrial robots. Optics Express 2018;26(18):23782-23795

[18]      王伟，徐敏. 一种基于光切显微镜的晶圆表面缺陷检测方法，2024.03.08，中国，ZL202111630568.8 

[19]      王伟，周冠宇，徐敏. 一种面向超薄光学零件吸取的真空吸盘，2022.03.18，中国，ZL201911051295.4 

[20]      王伟，周冠宇，张祥朝，徐敏. 一种精准测量弱刚性薄形零件厚度的装置及方法，2021.07.13，中国，ZL202011010510.9 

[21]      王伟，周冠宇，徐敏. 一种环形槽真空吸盘，2021.08.17，中国，ZL202022209108.5 

[22]      王伟，徐敏. 基于智能数控平台的子孔径拼接激光干涉在线测量方法及系统，2016.02.24，中国，ZL201310179320.3 

[23]      徐敏，王伟. 基于智能数控平台的铣磨抛光装置，2012.07.25，中国，ZL201010506393.5